Torque Limiting Module Unit Fitted to Morbark® Wood Grinding Machine
Provided to protect the Diesel Engine, Clutch, U-joint and the Rotary Cutter Head. Various size of units supplied depending on release torque requirement.
Brunel Torque Limiting Clutches REMOVE Overload Problems
Torque Limiters are designed to prevent machine failure and mechanical overload. During torque overload, Brunel Corporation Torque Limiters “release” to prevent mechanical components from excessive torque loads.
Brunel Torque Limiters can protect vital equipment saving you time and money.
Brunel’s Torque Limiting Safety Element Modules have been specifically designed to provide overload protection for applications where very high torques are transmitted and to extend the range covered by Brunel Type JA units. The modular system provides facilities for virtually unlimited torque capacity and lends itself to many transmission applications – chain, belt and gear drives, or shaft-to-shaft gear or flexible coupling drives.
The maximum release torque depends on the number and size of Torque Limiting Modules that can be incorporated, and the size of the unit that can be accommodated within the confines of the installation. Internally & externally adjusted modules provide repeatability better than ±5%.
Gone are the problems associated with slow reaction electrical overloads and shear pins which give a wide torque variation and rapidly overheating slip clutches.
Brunel Torque Limiting Clutches will save you money. The initial cost of a Torque Limiters is normally covered by the savings of down time and lost production during the first overload. The all metal totally enclosed clutches provide years of trouble-free service — with ±5% repeatability — and are virtually maintenance free.
- Overload Protection 100% 100%
- Reliability 100% 100%
News & Announcements
Come visit us at the SAG 2023 Conference, Sept. 24-28th, 2023 at the JW Marriott Parq Vancouver. Come visit our booth for Brunel Torque Limiter product line for all of your mining equipment protection and meet our team.
Come visit us at the SME 2023 Annual Conference and Expo in Denver. Feb. 26 - March 1, 2023 We are located at booth #1401. Come visit our booth for Brunel Torque Limiter product line for all of your mining equipment protection and meet our team.
How It Works
The—Torque Limiting—Safety Element Module
Brunel’s Torque Limiting—Safety Element Modules have been specifically designed to provide overload protection for applications where very high torque’s are transmitted. The multiple springs control torque setting is accurate within ±5% and is maintained indefinitely. Ease of maintenance is assured by eliminating the need for continuous adjustment and improves operator safety with the enclosed springs design. This all metal totally enclosed construction allows for longer life in a contaminated environment. Brunel’s Safety Element Modules will increased the dependability of the your drive application and there is a larger range of torque settings available to meet your specific application needs.
The modular system provides facilities for virtually unlimited torque capacity and lends itself to many transmission applications – chain, belt and gear drives, or shaft-to-shaft gear or flexible coupling drives. The maximum release torque depends on the number and size of Safety Element Modules that can be incorporated, and the size of the unit that can be accommodated within the confines of the installation. Internally & externally adjusted safety element modules provide repeatability better than ±5%. Modular design simplifies maintenance. The user can replace Safety Elements Module—the working components—without removing the clutch from the shaft. The clutch can be removed—dropped out—without moving the motor back.
Brunel Torque Limiter—Test Stand
Torque Testing of JSE3 Crusher Torque Limiter
Brunel Torque Limiter—Radial Torque Limiter
Torque Limiter Engaged and Disengaged Animation
The Brunel Corporation is a world leader on Modular Design Ball Detent Torque Limiters. Founded in 1988 to become the successor to Formsprag (Dana Corporation) as Manufacture and Distributor of Bibbigard Torque Limiters offering turnkey systems incorporating Torque Limiters with Brake Systems, Gear Couplings, Torsional Couplings, U-Joint Shafts, Spacer Shafts, Turning Locking and Braking (TLB) Systems.
Sales, engineering, manufacturing capabilities and complete stock located in Wichita Falls, Texas for both Torque Limiters and Electronic Power Module
Brunel Corporation is the exclusive North American agent for Bibbigard Torque Limiters.
For more information Contact Us.
How To Reach Us
For More Information About Protecting Your Industries Equipment